BiDirectional Programmer.

Scheme produced by Eduard Panchenko ed@enak.dc.ukrtel.net
PCB layout by Igor Popov pop@akz.lg.ua
Software written by CnCLab with Eduard Panchenko.

• Use LPT port ( Bidirectional or EPP mode)
• EPROM Read speed:    90 Kb/s
• EPROM voltage:    4.6 - 6.3 V (4 levels)
• Programm voltage:    5.5 - 26.0 V (32 levels)
• Erase/ID voltage:    12.0 - 14.0 V
• Embedded DC/DC convertor
• 6 LEDs
  

• 27cXXX - UV EPROM
• 28fXXX - EEPROM
• 29cXXX - Flash memory
• 29fXXX - Flash memory
• 49fXXX - Flash memory
• 49FHW - Firmware Hub

• 62cXXX - STATIC RAM
• 24cXXX - I2C SEEPROM
• 93cXX - MW SEEPROM
• 89c5x - FLASH/EPROM MCU
• 89cx051 - ATMEL FLASH MCU
• PIC16F8x - Microchip MCU

Attension!

Project is still under development, if you are a want help us - welcome...
Project is FreeWare for noncommercion use.

Links

http://www.geocities.com/pop_eco/bidi13e.htm - Programmer PCB and Adapters (RU)
http://hometown.aol.de/BiDiPro/BiDi_DE.rar - Documentation (De)